NeuraLog Calibrate the Well Log Track: Scale Axis

The Scale Axis is set up to reflect the properties of the curve you are tracing.  These include value range, track type, and curve units.  Use the first mode (Point Definition Mode) to set up the Scale Axis.

• Set the Scale Axis by picking a left scale point and then entering the left value in the box that appears.
• Set the right point of the scale axis on the track and enter its value
• Set the Scale Track Type and the Units as you enter these values.  They may also be set afterwards using the controls in the SCALE AXIS section of the main display.

Both Depth and Scale axis are automatically named and numbered based on the parameters you select.

Replay     Next