October 7, 2026•CallistoFirmware Update26.10.07.1
Servicing and interface refinements
This Callisto firmware update refines the printer interface, completes a servicing routine fix, and corrects a report setting default.
- Improved the Scaling and Alignment page and the Start button on the Printbar Replacement page.
- Completed the sled advance fix, which now supports up to 5 iterations, and aligned the stall values in the Printbar and Sled replacement routines.
- Fixed Report Settings so Print Speed no longer defaults to 0.
September 18, 2026•NeuraLogFixes + Enhancements2026.07.01.3
Stability fixes and improved NeuraView compatibility
NeuraLog improves stability, restores the Re-Run AILFE workflow, and resolves an installation conflict with the latest version of NeuraView.
- Fixed an issue that could cause NeuraLog to close unexpectedly when rotating logs 90 degrees.
- Restored the Re-Run AILFE function so corrected log sections can be reprocessed as intended.
- Updated installer components to eliminate installation conflicts with NeuraView 2026.08.27.1.
View Release Notes: Stability fixes and improved NeuraView compatibility (opens in a new tab) →
August 27, 2026•NeuraViewFeature + Security Update2026.08.27.1
AI-powered OCR and searchable PDF workflows
NeuraView adds AI-assisted text capture, searchable PDF creation, expanded batch-processing tools, improved color review, and updated Windows runtime components.
- Added AI-powered Extract Text for capturing text from selected areas of an image.
- Added Extract All Text for processing an entire image document.
- OCR results can be reviewed, corrected, copied, or saved as PDF, TXT, or CSV.
- Added automatic OCR when opening images, with options to generate searchable PDF files.
- Added AI-powered OCR to the Batch TIFF to PDF workflow.
- Added Color Interactive Mode for easier review of selected colors in color and grayscale images.
- Updated Microsoft Visual C++ runtime dependencies for improved security and compatibility with modern Windows environments.
- Additional stability fixes for zoom, stitching, Instant Rescan, and color-selection workflows.
View release notes: AI-powered OCR and searchable PDF workflows (opens in a new tab) →
August 26, 2026•CallistoFirmware Update26.08.26.2
Well-log printing and reliability improvements
The latest Callisto firmware includes several improvements affecting well-log printing, printer reliability, servicing, and support workflows.
- Corrected the well-log copy display while printing.
- Improved fan behavior during printing.
- Controller updates no longer reset the BNB.
- Improved camera performance on the viewer page.
- OEM1 replacement now preserves and restores network settings and supports external USB.
- Held Jobs can now be sorted by date.
- Additional servicing and maintenance logging improvements.
August 10, 2026•NeuraScanner 4000Certification
New emissions conformity documentation published
Compliance documentation for the NeuraScanner 4000 is now available through Neuralog support resources and the NeuraScanner documentation.
- CE / UKCA Declaration of Conformity published.
- FCC Declaration of Conformity published.
- Certification links have been incorporated into NeuraScanner documentation for easier access.
August 5, 2026•NT1000Feature Update
Direct printing from SDS Warrior
The NT1000 truck printer now supports direct printing from SDS Warrior software, so well logs can be printed straight from Warrior's Plot Job Editor.
- Print well logs directly from SDS Warrior to the NT1000 to streamline field workflows and get printed output right when you need it.
- Adjust the printed scale to meet operational or customer requirements.
- Current NT1000 users add the printer by importing the NT1000 configuration, downloaded from the Neuralog website, with the Restore tab of the Warrior Backup Application. It adds the NT1000 to Warrior's printer list without affecting other Warrior settings.
- Once imported, select the NT1000 in the Warrior Plot Job Editor and print from your existing workflow.
Read the full update: Direct printing from SDS Warrior →
July 28, 2026•NeuraScannerMajor UpdateNeuraScan 2026.07.28.1
Introducing the next-generation NeuraScanner 4000
The NeuraScanner platform has been redesigned with new hardware and NeuraScan software for faster, quieter, and more reliable well-log scanning.
- Introduced the new NeuraScanner 4000 hardware platform.
- Added SuperSpeed USB-C connectivity.
- Improved scanning performance and throughput.
- Added paper sensing with LED feedback.
- Enhanced media-detection performance.
- Updated image-sensor technology for higher-quality scans.
- Motor tuning provides quieter scanner operation.
- Added automated, user-friendly calibration routines.
- Introduced a more energy-efficient power supply.
View release notes: Introducing the next-generation NeuraScanner 4000 (opens in a new tab) →
July 28, 2026•NeuraLogFixes2026.07.01.2
NeuraLog reliability improvements
A focused maintenance release addressing several issues reported in recent NeuraLog workflows.
- Resolved an issue that could cause NeuraLog to close unexpectedly when working with certain logs in the Thumbnail Window.
- Corrected unintended AILFE processing of color logs.
- Fixed license validation during OpenWorks LAS export.
View release notes: NeuraLog reliability improvements (opens in a new tab) →
July 1, 2026•NeuraLogEnhancement2026.07.01.1
Faster project search and expanded AI-powered OCR
This NeuraLog release improves project navigation, text capture, LAS display precision, compatibility, and AI-assisted workflows.
- Added Project Explorer search to quickly locate files across large project groups.
- Expanded AI-powered OCR with Extract Text and Extract All Text workflows.
- Added selectable AI platforms for OCR, including Neuralog Vision, Gemini, and ChatGPT.
- Improved LAS scale adjustment precision.
- Improved support for file paths containing accented and other wide characters.
View release notes: Faster project search and expanded AI-powered OCR (opens in a new tab) →
June 1, 2026•CallistoEnhancement26.06.01.1
Job profiles and improved service workflows
This release adds new job-based calibration functionality while improving printer servicing and day-to-day operation.
- Added Job Profiles that automatically associate a calibration profile with a specific job name.
- Added an OEM1/OEM2 replacement workflow that preserves printer settings and records during hardware replacement.
- Significantly improved jog-button responsiveness.
- Added support for retrying BNB purge operations when an initial purge does not complete successfully.
- Improved replacement logging and printer diagnostics.
May 20, 2026•NeuraLogMajor Update
NeuraLog 2026 introduces AI-enhanced digitization
NeuraLog 2026 brings new AI-assisted tools directly into the well-log digitization workflow while keeping users in control of the final data.
- AILFE helps identify and isolate curves, grids, and background elements.
- AI-powered OCR captures well-log header information and helps populate key fields.
- New workflows reduce repetitive manual work while preserving review and quality control.
Learn about NeuraLog 2026: NeuraLog 2026 introduces AI-enhanced digitization →
April 20, 2026•CallistoFirmware Update26.04.20.1
Improved printhead protection and update management
Callisto received several reliability and maintenance improvements designed to protect the printhead and simplify printer management.
- Updated printhead behavior so the head rises sooner after a job completes.
- The fan now remains active while the printhead is down to help reduce the possibility of printhead strikes.
- Check for Updates now shows installed, downloaded, and latest available versions.
- Improved calibration-profile page loading time.
- Patched camera timeout and other reliability issues.
March 31, 2026•NeuraScannerSecurity UpdateNeuraScan 2026.03.31.1
Updated Microsoft runtime for improved security
NeuraScan software now installs the latest supported Microsoft Visual C++ runtime for better security and compatibility with modern Windows.
- Replaced the deprecated Microsoft Visual C++ 2012 Redistributable with the latest supported Microsoft Visual C++ Redistributable.
- The installer now automatically downloads and installs the most current supported runtime during setup.
- Reduces exposure to known vulnerabilities without impacting application functionality or user workflows.
March 2, 2026•CallistoMaintenance26.03.02.3
Improved diagnostics, logging, and installation reliability
A maintenance release focused on making Callisto easier to support and troubleshoot.
- Fixed an installation issue introduced in the previous release.
- Added additional logging for support and diagnostics.
- Improved supplies information and service logging.
- Improved the sensor optimization routine and its diagnostic feedback.
- Added additional BNB and MPCA replacement logs.
January 30, 2026•CallistoMajor Update26.01.30.1
Camera-assisted quality feedback and expanded diagnostics
This major Callisto release added support for optional live-image quality feedback along with new reporting and printer diagnostic capabilities.
- Added firmware support for the optional Callisto camera and lightbar system.
- Print-output images can be viewed and captured for troubleshooting and support.
- Expanded customizable print-quality reporting.
- Added additional calibration-profile controls.
- Expanded printer diagnostic information.
- Improved printhead-cleaning reliability.
December 9, 2025•NT1000Firmware + DriverFirmware 2.25 / Driver 1.0.16
Sharper printing, smarter heat management, and more control
A major NT1000 firmware and Windows driver update improved print quality, printhead management, job handling, and field control.
- Expanded halftone processing for smoother grayscale reproduction.
- Added smarter printhead heat management for extended print runs.
- Added adjustable print speeds from 40-100 mm/sec.
- Improved handling of interrupted jobs when paper runs out or the printer restarts.
Read the full update: Sharper printing, smarter heat management, and more control →
May 20, 2025•NeuraViewFeature Update2025.05.20.1
Keyboard accessibility improvements
NeuraView improved keyboard accessibility across the interface and is now included with the NT1000 Truck Printer as a Print Only version.
- Added keyboard shortcuts and descriptions across all ribbon tabs and tools to improve use with an external keyboard for people with mobility or vision disabilities.
- Improved Tab and Shift+Tab navigation across panels and dialogs, with the shortcut list available under Help > Hot Keys > Accessibility.
- NeuraView Print Only version now ships with the NT1000 Truck Printer, allowing users to open and print well-log images and LAS files.
- Added a hot key to show or hide the shortcuts panel and fixed the default value in the Print panel's Copies field.
April 28, 2025•CallistoLog Improvement25.04.28.1
Improved well-log cancellation behavior
This Callisto release included several general reliability improvements along with an important correction for well-log printing.
- Well-log jobs no longer attempt to adjust media position after a canceled job.
- Listener and job status are now visible from the operator-panel home screen.
- Restored and improved several printer servicing and replacement workflows.
April 2, 2025•NeuraLogFeature Update2025.03
Symbol capture, tracing refinements, and workflow improvements
NeuraLog 2025.03 introduced new capture tools and a range of workflow, accessibility, project-management, and digitization enhancements.
- Added Symbol Capture for automatically identifying repeated symbols in well logs.
- Expanded keyboard accessibility and navigation.
- Improved Project Explorer file navigation.
- Added tracing and calibration refinements for more precise digitization.
- Improved behavior on high-resolution displays.
Read the full update: Symbol capture, tracing refinements, and workflow improvements →
February 18, 2025•CallistoLog Fix25.02.18.2
Well-log pause and resume improvements
A Callisto controller update specifically addressed pause-and-resume behavior during well-log printing.
- Patched pause and resume behavior for well-log jobs.
- Improved reliability when continuing interrupted print workflows.
January 21, 2025•CallistoFirmware Update25.01.21.2
Expanded Callisto support for well-log printing
This unified Callisto release restored full support for both Log and Label printing while adding several stability and job-management improvements.
- Restored well-log printing support to the current general firmware branch.
- Corrected well-log continuation-count handling.
- Improved media loading.
- Added additional cancellation information to the job log.
- Improved handling of large copy-count jobs and extended print times.
- Added firmware-update history logging.
November 21, 2024•CallistoFeature Update24.11.21.3
Next Job Settings and Scalar Board support
This Callisto label release adds Next Job Settings, Print and Present Each Job, and operator panel support for the Scalar Board, along with many fixes. Well-log printing is not supported in this release.
- Added a Next Job Settings page to control job-to-job behavior, including turning reversing between jobs on or off, a Jogging Override that prevents automatic reversing after you jog the media, and a Max Reverse Distance setting. The printer now backs up to the launch zone between the printhead and pinch roller to prevent skipped labels and avoid smearing the previous label.
- Added Print and Present Each Job, which presents the final label of each job at a position you specify and reverses before the next job starts to avoid skipping a label. A beta Print and Present Each Label mode is also available but is not fully supported.
- The Scalar Board can now be updated from the Check For Updates page, with a dedicated support tools page to set the scale factor. The image is also no longer stretched when print speed increases.
- The label count can now be adjusted when continuing a job, for both simple copies and sequenced labels.
- Calibration Profiles are more user friendly, and the correct profile is now applied when a job with profile information is sent. Callisto Driver 1.0.6 also fixes how Microsoft PowerPoint single-page and multi-page copies are handled.
- Added more settings pages and info buttons that explain certain settings, and you can now upload BNB, controller, or Scalar Board firmware directly from the Callisto web page. Web page and sensor settings now reload correctly after a controller update.
- Fixes and improvements include more precise Web Press Mode spacing, bad load alerts that appear on load and no longer appear after you jog the media, Print and Present no longer backing out of the printer after tearing, correct low ink level display, support for full-bleed labels of any gap size with skipped label protection, and added German and French language support.
March 7, 2024•CallistoFixes + Enhancements24.03.07.2
Print Separations, job log updates, and fewer skipped labels
This Callisto clean-up release adds a Print Separations tool, reorganizes the job log, and stops labels from being skipped between jobs.
- Added a Print Separations tool to Calibration Profiles that prints up to 7 distinct monocolor copies of a job (black, magenta, cyan, yellow, red, green, and purple). It is currently available in the desktop application only.
- Labels are no longer skipped between subsequent jobs.
- Reorganized the job log to better match the print driver, with additional settings (mod64 value, profile override, and background spit), clearer units, and an updated TOF plot. Job log data is no longer corrupted when printing after uploading a job log from the web page.
- Callisto Driver 1.0.5 fixes a network printing issue and widens the Ink Intensity Adjustment range to 50% to 150%.
- BNB Status and Media Present Status now appear on the web operator panel, Display Timeout can be set from the operator panel, and the Next Label and Immediate pause options are back in pause settings.
- Fixed label 1 and 2 placement on static copies jobs, Calibration Profile Override, and the well-log copy count on job continuation. Optimize now runs after a controller update, and the sensor timeout no longer reactivates after Optimize.
- A follow-up patch fixed an ink mismatch on the Supplies button and an error in mod64 job log reporting.
February 22, 2024•NeuraViewFeature Update2024.02.22.1
Transparency mode and AutoCAD DXF support
NeuraView added a transparency overlay tool and support for viewing and printing AutoCAD DXF files.
- Added Transparency mode for overlaying and comparing an image with one displayed in NeuraView or another application, with adjustable transparency up to 95%.
- Added support for opening, viewing, and printing AutoCAD DXF vector files.
- Improved batch image conversion so errors are written to the report file instead of stopping processing.
- Fixed issues with toggling colors in some grayscale images and with saving color-scanned logs to PDF.
February 12, 2024•CallistoMajor Update24.02.12.0
Calibration Profiles, skipped label protection, and a redesigned updater
This major Callisto update adds Calibration Profiles, skipped label protection, support for any gap size, and accessory port support, along with a redesigned controller updater and many reliability fixes.
- Callisto can now print labels on media of any gap size, including no gap.
- Added Skipped Label Protection, which zigzags the printer to avoid skipping a label within a job. Turn it on in print features and set the maximum reverse distance in settings.
- Added Calibration Profiles. Create up to 20 custom printhead profiles that save head height, die leveling, die alignment, and your notes, then apply them from the operator panel or web page, or select one for a job in the Callisto driver (Callisto Driver 1.0.4).
- Print and Present is now generally available. It advances the last label of a job to a position you set for easy peel or tear, and reverses at the start of the next job so it begins on the next label.
- Added accessory port support for external accessories, including the TotalPress finishing system.
- The controller updater was redesigned: updates now complete in about 30 seconds without a manual reboot. Printers with the updated image also boot in about 90 seconds.
- Added a Prime Printhead routine, job storage settings, system backup and restore in support tools, and redesigned pause and resume with Auto Resume and Manual Resume options. Held jobs, job log, media loading, sensor optimization, printhead height, and web page controls were also improved, along with fixes for job continuation, ink-out continuation, and well-log printing.
November 2023•NeuraSectionFeature Update
Expanded well-data support and calibrated-log export
This NeuraSection release expanded well-data interchange, production-test support, calibrated-log export, and project navigation.
- Added enhanced export of calibrated well logs by individual log or by well.
- Calibration information can be exported to GeoGraphix DRA or Petra LIC formats, with or without image files.
- Added support for importing, editing, and exporting Well Production Test data.
- Expanded display of initial-production and production-test oil, gas, and water volumes.
- Improved folder selection and support for network locations using UNC paths.
Read about the release: Expanded well-data support and calibrated-log export →
August 9, 2023•CallistoFixes23.08.09.2
Ink, media loading, and update fixes
This Callisto update fixes a range of ink level, media loading, and print placement issues, and makes updates more reliable.
- Ink levels now display correctly on the operator panel and web operator panel. They reflect the ink threshold and appear in the same order as the ink inside the printer (YMCK).
- Fixed a startup issue where ink values could stay at 0 and the printer could remain in the booting state for several minutes after power-on.
- Ink-out job continuation no longer skips a label in print on next mark mode, and the ink drop icon now disappears correctly when the print completes.
- Fixed print placement when using Print on Leading Edge, Print on First Mark override, and Peel and Present, including when you switch between them. On media-out continuation, the job now resumes with the same load setting it started with.
- When you cancel a job, the media now advances to the next label so a partially printed label is not printed over, and the timer no longer stays at 0 seconds after a pause and cancel.
- Check for Updates is more reliable. Media is no longer ejected during a BNB update, a failed controller update tries again, and update buttons now ask you to confirm.
- Other fixes include red bar job separator placement for wide and half scale well logs, the operator panel no longer flashing old job information when a new job arrives, and the printhead capping as soon as the job queue is cleared.
July 19, 2023•CallistoFeature Update23.07.19
Sensor optimization and Auto Present
This Callisto update adds guided sensor tuning with live diagnostics, a Present and Peel option, and a customizable network transfer timeout.
- Added Sensor Optimization, a guided procedure that tunes sensor brightness, sensitivity, and paper present threshold for both mark and gap media to avoid extra top-of-form feeds and skipped labels.
- Added Sensor Diagnostics Plotting, which shows sensor behavior as a live plot on the operator panel.
- Added a customizable sensor timeout to help the sensors last longer.
- Added a Job Transfer Timeout setting for the maximum wait time on network file transfers, useful on very slow networks.
- Added Auto Present (Present and Peel), which advances the last label of a job to the end of the print zone for easy peeling or tearing and reverses at the start of the next job so no label is skipped.
- Ramp Up speed can now be customized in Device Settings, and the MAC address is shown under Device Information.
- Sensor settings (brightness and sensitivity) are now recorded in the job log.
March 24, 2023•CallistoFeature Update23.03.24.1
Log separators and web press printing modes
This Callisto update adds a well log separator, prints with no skipped label between jobs, and adds new web press printing modes, along with job cancellation improvements.
- Added an optional red separator marker that prints between well log jobs.
- Added Print on Subsequent Label so no label is skipped between jobs.
- Web press printing now offers three modes: standard Web Press with the gap you set, Static Banner Copies for printing copies at high speed with a small gap, and Continuous Copies, which stitches labels together with no gap.
- Added job cancellation over the Listener and from the Job Queue screen, and added support for uncollated copies.
- Updated the Listener to work with 300x driver files.
- Fixed a motor stall that could occur when a job was sent while the printhead was down, and updated the calibration step size.
February 15, 2023•CallistoMajor Update23.02.15
Job continuation, web server job management, and faster starts
This major Callisto update lets interrupted jobs resume at the correct label, speeds up print starts, and adds job management and settings import and export on the printer's web page.
- Added Job Continuation. After you replace ink cartridges, load new media, or clear a media stall, the job resumes printing at the correct label.
- Time to first print is much shorter for data-heavy jobs, and the printer automatically pauses to wait for data if it arrives more slowly than the print speed, for example on a slow network.
- Added job management to the printer's web server, including the Job Queue, Job Log, and Held Jobs. You can view and reprint jobs directly, and sort and multi-select held jobs for printing or removal.
- Printer settings can now be imported and exported through the web server, which makes it easy to set up several printers the same way.
- The operator panel home screen now shows a color ink drop icon and an alert when a cartridge is empty.
- Added Spanish language support and international character sets, and an optional Wi-Fi card is now available as a printer upgrade. The installer was also revamped for easier printer updates, with an automatic backup and reboot.
- Fixed crashes and shutdowns that could follow cancelling high coverage jobs, a condition where the printer controller stopped responding, and a failure to print when user or file names contained international characters.
December 1, 2022•NeuraViewFeature Update2022.12.01.1
Batch tools for PDF and TIFF conversion
NeuraView added batch tools for converting and re-saving multiple images at once.
- Added Batch PDF to TIFF to convert multiple PDF files into single-page TIFF images.
- Added Batch TIFF to PDF to convert multiple TIFF images into single-page or multi-page PDF files.
- Added Batch Change DPI to change the resolution of multiple TIFF files at once.
- Batch tools run from the File > Tools menu or the command line, and each creates a report log of the files processed.
July 14, 2022•NeuraLogFeature Update2022.07.14.1
Log section navigation and thumbnail view
NeuraLog now identifies log sections automatically and adds a bird's-eye thumbnail to make navigating long logs easier.
- Added automatic identification of the well header, scales, and log sections when a log image is opened, with new Next and Previous buttons and Shift+N / Shift+P shortcuts to move between sections.
- Added a dockable Image Thumbnail window that highlights identified sections and depth axes and scrolls the main view when clicked.
- Added a button in Image Preferences to adjust the global PDF-to-TIFF conversion settings, including image width and DPI.
- Text annotations, including their text and depth location, can now be exported to a formatted CSV file so other software can use descriptions captured during log digitization.
- Added an Adjust LAS Display tool in the QA/QC Tools section of the LAS tab to match LAS track scale width and length to the Light Table image.
- Added a 2 in = 100 ft LAS display scale and fixed several issues in Project Explorer, LAS editing, and step-curve digitizing.
December 28, 2021•NeuraSectionFixes + Enhancements2021.12.28.0
TVD/MD depth tracks and new well statuses
This NeuraSection release improved LAS depth-track handling and added new well statuses and symbols.
- LAS import now detects the TVD flag in the file or file name, and the depth track displays MD or TVD to match the Depth tool setting.
- Saved depth-track settings, including color, font, horizontal display, and the TVD/MD label, are now restored when a LAS file is reopened.
- Added new well statuses and symbols to the project database.
- Fixed issues with Area of Interest displays, GeoTIFF map warnings, and importing NeuraMap data.
December 17, 2021•NeuraMapSupported Release2021.12.17.1
NeuraMap map digitizing and reservoir-analysis platform
Version 2021.12.17.1 remains the current supported NeuraMap build. NeuraMap combines automated map digitizing, transformation, quality control, and reservoir analysis in one workflow.
- Automated tracing helps capture contours, faults, lines, points, and other map data.
- Calibration tools compensate for image skew and stretch.
- Supports scanned images, digital maps, GeoTIFF, DXF, seismic-location data, and other industry formats.
- Digital data can be overlaid on the original image for quality control and editing.
- Supports thousands of mapping and coordinate systems along with user-defined systems.
- Reservoir tools calculate areas, volumes, and reserves from mapped boundaries and structures.
Explore NeuraMap: NeuraMap map digitizing and reservoir-analysis platform →
August 25, 2021•NeuraViewFixes + Enhancements2021.08.25.1
Faster drawing tools and improved stability
This NeuraView release improved drawing performance and resolved a number of stability and display issues.
- Improved performance when drawing annotations, shapes, and stitch areas.
- Ribbon color selectors now update correctly when an existing annotation or shape is selected, and annotations now post in the color you choose.
- Added image-scrolling hot keys (Home, End, Page Up, and Page Down) and improved how the Stitch tool displays very long images such as well logs.
- Fixed several crashes and freezes involving the Stitch tool, shapes, annotations, LAS files, and Log Correlation Mode.
January 12, 2021•NeuraSectionFeature Update2020.12.22.1
GeoGraphix WellBase V4 support and flexible UWI formatting
NeuraSection added GeoGraphix WellBase V4 import and export along with more flexible API/UWI formatting.
- Added support for importing and exporting well data in GeoGraphix WellBase V4 format.
- API/UWI dash formatting now applies in all windows and views, with US 14-digit API formatting included and fully customizable for other UWI formats.
- Improved Generic ASCII import so values in double quotes are read as a single column and long CSV lines are parsed correctly.
- Added a Hot Keys list, a license-expiration reminder 60 days in advance, and fixes for high-resolution screens, cross-section templates, and well export.
September 1, 2020•NeuraViewFeature Update2020.09.01.1
More shape options and improved drawing tools
NeuraView added new line styles, a hot-key reference, and a smoother workflow for editing shapes and annotations.
- Added outline dash styles (solid, dash, dot, dash-dot, and dash-dot-dot) for lines, rectangles, ellipses, and polygons, plus a No Fill option for shapes.
- Selecting a shape or annotation for editing now loads its settings into the ribbon, and NeuraView remembers the last text color you picked.
- Added a Hot Keys list under the Help tab and a reminder that starts 60 days before a software license expires.
- Improved display on high-resolution screens and fixed issues with the Stitch tool and opening DLIS files.
January 31, 2020•NeuraLogMajor Update2020.01.31.1
New ribbon interface, Start Page, and Project Explorer
NeuraLog received a major redesign with a ribbon-based interface, a new Start Page and Project Explorer, and OCR text extraction.
- Added a Start Page that opens on launch and replaces the Project and Document Wizards, along with a tree-based Project Explorer for opening LAS, image, and working files across projects without switching projects.
- Replaced toolbars with a ribbon whose tabs change automatically to match the open document type, plus a Help tab and a search box for finding commands and tools.
- Added an OCR tool that extracts text from a selected part of an image so it can be edited, associated with a well or document property field, and saved.
- Fixed numerous stability issues across digitizing, tracing, LAS, and lithology tools.
October 1, 2019•NeuraSectionFixes + Enhancements2019.09.24.1
Smarter map projections, curve import, and stability fixes
This NeuraSection release improved project-map projections and curve-data import and resolved many stability issues.
- Project maps now set the correct projection automatically when DXF or shapefile data is added, using the ESRI .prj file when available.
- Improved custom curve-data import by saving LAS files to the project's LAS folder, opening imported wells automatically, and adding an option to import step-curve values.
- Well logs now open at 100% zoom by default, with a user preference to change it.
- Fixed numerous crashes and display issues in well logs, maps, and cross sections.
September 13, 2019•NeuraMapFeature Update2019.9.13.1
Single GeoTIFF export and improved volumetrics
NeuraMap added single GeoTIFF export and corrected volume calculations for objects with holes.
- Added single GeoTIFF export so users can georeference TIFF images and export the raster as a single GeoTIFF.
- Fixed the volumetric calculation for objects with holes in the center and removed unnecessary contour areas.
- Improved shapefile support by fixing an import issue and reporting exported contour elevations with two decimal places.
- Updated the installer to include a required component that was missing on some computers.
January 30, 2019•NeuraViewFeature Update2019.01
Redesigned ribbon interface with custom workflows
NeuraView moved to a ribbon-based interface that opens each file type in the right tab and can be customized.
- Changed the interface to a ribbon.
- Added Smart Tab technology so opening a file automatically opens it in the appropriate tab.
- Added the ability to create custom ribbon tabs and workflows.
- Updated the drawing tools and hot keys, and limited maximum zoom to 1000% to avoid memory issues.
July 7, 2017•NeuraScannerEnhancementNeuraScan 2017.07
Batch scan reports
NeuraScan software added an optional batch scan report that records each scanned file and its length.
- Added an optional Batch Scan Report listing each scanned file name and its length in inches, saved alongside the batch file.
- Increased the file-name display and updated licensing and Help information.
- Fixed Open Batch File so it opens the file instead of prompting to save.
July 2017•NeuraLogFixes + Enhancements2017.07
Batch curve import and improved LAS export
This NeuraLog release added batch import of curve data and improved LAS export and file merging.
- Added the ability to batch import curve and point data from a single Excel or ASCII file.
- Fixed GeoGraphix DRA and PETRA LIC imports so scale and header areas are included.
- Fixed merging curves when exporting a digital log and a problem where the end of an LAS file flattened out.
- Improved LAS file merging, including formatting and switching the primary file.
January 6, 2017•NeuraMapEnhancement2017.01
Improved map editing, auto-tracing, and 3D area display
This NeuraMap release improved data-capture tools and added a 3D display for selected areas and a new map projection.
- Made the delete-to-end-of-line tool work more efficiently.
- Improved auto-tracing for oddly oriented maps with a lot of blank space at the top.
- Added the ability to display a selected area in 3D for volumetrics.
- Added the MAGNA-SIRGA / Colombia Bogota Zone map system.
December 4, 2015•NeuraLogFixes + Enhancements2015.12
Finer depth steps and improved dipmeter export
This NeuraLog update refined step-curve capture and improved dipmeter data export.
- Added the ability to set the depth step to decimal increments when capturing step curves such as rate of penetration (ROP).
- Fixed a problem when exporting dipmeter data from a multi-linear scale.
- Added export output choices for a better display of dipmeter data.
November 9, 2015•NeuraLogFeature Update2015.11
Expanded data import, grid adjustment, and point-data capture
This NeuraLog release expanded well-header import, grid adjustment, point-data capture, and LAS display options.
- Added support for importing well headers from Excel .xlsx files, including files with multiple API lines.
- Added the ability to adjust all grids below a selected grid, including their tilt, for every gridding type.
- Added the ability to capture discrete point data and to display point and dipmeter data on LAS files.
- Fixed auto-gridding on grayscale and color images, auto-tracing at track edges, and exporting multiple curves with the same name.
